Emerson Micro Motion 4200 Installation Manual

1 Planning
1.1 About this document
This manual provides information on planning, mounting, wiring, and initial setup of the
transmitter. For information on full configuration, maintenance, troubleshooting, or
service of the transmitter, see the configuration and use manual.
The information in this document assumes that users understand:
• Basic transmitter and sensor installation, configuration, and maintenance concepts
and procedures
• All corporate, local government, and national government safety standards and
requirements that guard against injuries and death
1.2 Related documentation
See the approval documentation shipped with the transmitter, or download the
appropriate documentation from the Micro Motion web site (www.emerson.com/
flowmeasurement):
• Micro Motion 4200 2-Wire Transmitter: Configuration and Use Manual
• Micro Motion 4200 2-Wire Transmitter: Product Data Sheet
• Micro Motion 4200 2-Wire Transmitter: Safety Manual for Safety Instrumented Systems
• Micro Motion ProLink III User Manual
• Sensor installation manual, which is shipped with the sensor
• FMEDA report for Coriolis Flowmeter with 4200 Transmitter, Prepared for Emerson by
exida.com LLC
1.3 Meter components
A 4200 meter consists of the following components:
• A transmitter
• A sensor
Installation Manual Planning
MMI-20058013 April 2019
Installation Manual 5

Emerson Micro Motion 4200 Specifications

General

Brand	Emerson
Model	Micro Motion 4200
Category	Transmitter
Language	English