3 Wiring the channels
3.1 Installation types for the 4200 transmitter
DANGER
If you are installing the transmitter in a hazardous area, refer to Micro Motion approval
instructions, shipped with the product or available from the Micro Motion web site
(www.emerson.com/flowmeasurement). Improper installation in a hazardous area can
cause an explosion.
General configuration example
A. 2-wire cable power and signal
B. 4-20 mA
C. mA receiving device
D. HART variables
E. DCS
F. Emerson AMS Trex communicator
Installation Manual Wiring the channels
MMI-20058013 April 2019
Installation Manual 21
To Next Page
Loading...
