71
Safety Manual
00809-0200-5100, Rev GB
Safety System Identification
February 2017
Safety System Identification
Appendix C Safety System Identification
Valid software and hardware versions:
Rosemount
™
5900 software version 1.B2, 1.B3, 1.C0
SIL Baseline BS3, BS4 (see main label)
A Rosemount Tank Gauging Safety System is identified by a unique SIL Baseline as specified in
the Functional Safety Certificate. The Baseline contains information about correct version of
hardware, software, and other relevant configuration items.
Baseline 3 and 4 for Rosemount 5900S or Rosemount 2410 can be combined.
Note
For configuration software TankMaster WinSetup, versions according to Ta ble C -1 apply.
Table C-1. TankMaster WinSetup Software Versions
C.1 Device Id
The Device Id of a Rosemount 5900 gauge with 2-in-1 option consists of two parts: “xxx-yyy”,
where “xxx” is the Device Id of the primary device and “yyy” is the Device Id of the secondary
device.
Example
Device Id: 443-438
Primary Device Device Id: 443
Secondary Device Device Id: 438
Function WinSetup version
SIL support 6.A2
dry-run support 6.B4
support for cone antennas 6.B6
SIL High Alarm Test 6.C0
To Next Page
Loading...
