Emerson Rosemount 3051S Series - Consider housing rotation

3 Consider housing rotation
To improve field access to wiring or to better view the optional LCD
display:
Procedure
1. Loosen the housing rotation set screw.
2. Turn the housing up to 180° left or right of its original (as
shipped) position.
3. Re-tighten the housing rotation set screw.
Figure 3-1: Transmitter Housing Set Screw
A. LCD display
B. Housing rotation set screw (3/32 in.)
CAUTION
Do not rotate the housing more than 180° without first
performing a disassembly procedure. Over-rotation may sever
the electrical connection between the sensor module and the
electronics.
Quick Start Guide January2024
12 Emerson.com/Rosemount