Emerson Rosemount 3051S Series - Product certifications; Rosemount 3051 SMV;3051 SFx; USA

11 Product certifications
11.1 Rosemount 3051SMV/3051SFx
Rev 2.14
European directive information
A copy of the EU Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EU
Declaration of Conformity can be found at Emerson.com/Rosemount.
Ordinary location certification
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical, mechanical,
and fire protection requirements by a Nationally Recognized Test
Laboratory (NRTL) as accredited by the Federal Occupational Safety
and Health Administration (OSHA).
Installing Equipment in North America
The US National Electrical Code (NEC) and the Canadian Electrical
Code (CEC) permit the use of Division marked equipment in Zones
and Zone marked equipment in Divisions. The markings must be
suitable for the area classification, gas, and temperature class. This
information is clearly defined in the respective codes.
11.1.1 USA
E5 US Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate
FM16US0089X
Standards
FM Class 3600 – 2011, FM Class 3615 – 2006, FM Class
3616 – 2011, FM Class 3810 – 2005, ANSI/NEMA 250 –
2003
Markings
XP CL I, DIV 1, GP B, C, D; T5; DIP CL II, DIV 1, GP E, F, G;
CL III; T5 (–50 °C ≤ T
a
≤ +85 °C); Factory Sealed; Type 4X
I5 US Intrinsically Safe (IS) and Nonincendive (NI)
Certificate
FM16US0233
Standards
FM Class 3600 –2011, FM Class 3610 – 2007, FM Class
3611 – 2004, FM Class 3616 – 2006, FM Class 3810 –
2005, NEMA 250 – 1991
Markings
IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F, G; Class
III; Class 1, Zone 0 AEx ia IIC T4; NI CL 1, DIV 2, GP A,
January2024 Quick Start Guide
Quick Start Guide 39