Emerson Rosemount 3051S Series - Page 34

Table 8-1: Fast Keys for Fully Compensated Mass and Energy
Flow (continued)
 Function Fast Key
sequence
 Totalizer Configuration 1, 4, 1, 3
 Totalizer Reading and Status 1, 4, 2, 1, 3
 Totalizer Units 1, 3, 3, 3
 Variable Mapping 1, 4, 3, 4
 Write Protect 1, 3, 5, 4
Table 8-2: Fast Keys for Direct Process Variable Output
 Function Fast Key
sequence
 Absolute Pressure Reading and Status 1, 4, 2, 1, 2
 Absolute Pressure Sensor Limits 1, 4, 1, 2, 8
 Absolute Pressure Units 1, 3, 3, 2
 Alarm and Saturation Level Configuration 1, 4, 2, 6, 6
 Alarm and Saturation Levels 1, 4, 2, 6
 Analog Output Trim Options 1, 2, 4, 2
 Burst Mode Setup 1, 4, 3, 3, 3
 Burst Mode Options 1, 4, 3, 3, 4
 Callendar-van Dusen Sensor Matching 1, 2, 4, 5, 4
✓ Damping 1, 3, 7
 Diaphragm Seals Information 1, 4, 4, 4
 Differential Pressure Reading and Status 1, 4, 2, 1, 1
 Differential Pressure Sensor Trim Options 1, 2, 4, 3
✓ Differential Pressure Zero Trim 1, 2, 4, 3, 1
✓ Differential Pressure Units 1, 3, 3, 1
 Equipped Sensors 1, 4, 4, 3
 Field Device Information 1, 4, 4, 1
 Gage Pressure Reading and Status 1, 4, 2, 1, 3
 Gage Pressure Sensor Limits 1, 4, 1, 2, 9
 Gage Pressure Units 1, 3, 3, 3
Quick Start Guide January2024
34 Emerson.com/Rosemount