Emerson SP2203 - Application Menu 2 Read-Only Integer; Application Menu 2 Read-Write Bit; Menu 19: Application Menu 2

Safety
Information
Introduction
Product
information
System
design
Mechanical
installation
Electrical
installation
Getting
started
Optimisation
Parameters
Technical
data
Component
sizing
Diagnostics
180 Unidrive SP Regen Installation Guide
www.controltechniques.com Issue Number: 2
9.16 Menu 19: Application menu 2
Menu 19 contains parameters that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
application Solutions Modules. The read write parameters in this menu can be saved in the drive.
19.01 Application menu 2 power-down saved integer
Drive mode Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range Regen -32,768 to 32,767
Default Regen 0
Update rate N/A
19.02 to 19.10 Application menu 2 read-only integer
Drive mode Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1
Range Regen -32,768 to 32,767
Default Regen 0
Update rate N/A
19.11 to 19.30 Application menu 2 read-write integer
Drive mode Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
11
Range Regen -32,768 to 32,767
Default Regen 0
Update rate N/A
19.31 to 19.50 Application menu 2 read-write bit
Drive mode Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Default Regen 0
Update rate N/A