Safety
Information
Introduction
Product
information
System
design
Mechanical
installation
Electrical
installation
Getting
started
Optimisation Parameters
Technical
data
Component
sizing
Diagnostics
12 Unidrive SP Regen Installation Guide
www.controltechniques.com Issue Number: 2
3 Product Information
3.1 Model number
The way in which the model numbers for the Unidrive SP range are formed is illustrated below.
3.2 Nameplate description
See Figure 3-2 on page 17 for location of rating labels.
Figure 3-1 Typical drive rating labels
SP frame size
Voltage rating
0:
2:
4:
5:
6:
Voltage independent
200V to 240V
380V to 480V
500V to 575V
500V to 690V
Configuration
0:
2:
3:
Wall mount, no dynamic brake control
Stand alone, no dynamic brake control
Current rating step
Unidrive SP product line
SPMA:
SPMD:
Power module power stages
for custom drive systems -
DC input
Power module power stages
for custom drive systems -
AC input
Wall mount
SPX
1 4 0 1
SP:
Solutions platform
complete inverter drive
SP1201
I/P 200-240V 50-60Hz 3ph 6.6A
O/P 0-240V 4.3 / 5.2A
Model
Input voltage
rating
Input
frequency
No. of
phases
Typical input
current for
Normal Duty
rating
Heavy Duty / Normal Duty
rating output current
Output voltage
range
SP 1,5 TL
Rating label
S.No:
3000005001
Serial
number
Model
Heavy Duty
Normal Duty
power rating
Customer and
t
Approvals
R
IND.
CONT.
EQ.
Please read manual before connecting.
SP1201 0.75 / 1.1kW
STDL25
Electric Shock Risk: Wait 10 min between
disconnecting supply & removing covers
Ser No:
3000005001
Made In U.K
Serial
number
SP 1,5 TL
Approvals label
CE approval Europe
C Tick approval Australia
UL / cUL approval
USA &
Canada
R
Key to approvals
To Next Page
Loading...