Emerson SP4403 - 3 Product Information; Model Number; Nameplate Description; Typical Drive Rating Labels

Safety
Information
Introduction
Product
information
System
design
Mechanical
installation
Electrical
installation
Getting
started
Optimisation Parameters
Technical
data
Component
sizing
Diagnostics
12 Unidrive SP Regen Installation Guide
www.controltechniques.com Issue Number: 2
3 Product Information
3.1 Model number
The way in which the model numbers for the Unidrive SP range are formed is illustrated below.
3.2 Nameplate description
See Figure 3-2 on page 17 for location of rating labels.
Figure 3-1 Typical drive rating labels
SP frame size
Voltage rating
0:
2:
4:
5:
6:
Voltage independent
200V to 240V
380V to 480V
500V to 575V
500V to 690V
Configuration
0:
2:
3:
Wall mount, no dynamic brake control
Stand alone, no dynamic brake control
Current rating step
Unidrive SP product line
SPMA:
SPMD: Power module power stages
for custom drive systems -
DC input
Power module power stages
for custom drive systems -
AC input
Wall mount
SPX
1 4 0 1
SP:
Solutions platform
complete inverter drive
SP1201
I/P 200-240V 50-60Hz 3ph 6.6A
O/P 0-240V 4.3 / 5.2A
Model
Input voltage
rating
Input
frequency
No. of
phases
Typical input
current for
Normal Duty
rating
Heavy Duty / Normal Duty
rating output current
Output voltage
range
SP 1,5 TL
Rating label
S.No: 3000005001
Serial
number
Model
Heavy Duty
/
Normal Duty
power rating
Customer and
da
t
e
code
Approvals
R
IND.
CONT.
EQ.
Please read manual before connecting.
SP1201 0.75 / 1.1kW
STDL25
Electric Shock Risk: Wait 10 min between
disconnecting supply & removing covers
Ser No: 3000005001 Made In U.K
Serial
number
SP 1,5 TL
Approvals label
CE approval Europe
C Tick approval Australia
UL / cUL approval
USA &
Canada
R
Key to approvals