Emerson UNIDRIVE M600 - Page 46

46 Unidrive M600 Getting Started Guide
Issue Number: 6
00.016 Ramp Enable {02.002} Off (0) or On (1) On (1) RW Bit US
00.017
Digital Input 6
Destination
{08.026} 0.000 to 59.999 06.031 RW Num DE PT US
Current
Reference Filter
1 Time Constant
{04.012} 0.0 to 25.0 ms 1.0 ms RW Num US
00.019
Analog Input 2
Mode
{07.011}
4-20 mA Low (-4),
20-4 mA Low (-3),
4-20 mA Hold (-2),
20-4 mA Hold (-1), 0-20 mA (0),
20-0 mA (1), 4-20 mA Trip (2),
20-4 mA Trip (3), 4-20 mA (4),
20-4 mA (5), Volt (6)
Volt (6) RW Txt US
00.020
Analog Input 2
Destination
{07.014} 00.000 to 59.999 01.037 RW Num DE PT US
00.021
Analog Input 3
Mode
{07.015}
Volt (6), Therm Short Cct (7),
Thermistor (8), Therm No Trip (9)
Volt (6) RW Txt US
00.022
Bipolar
Reference
Enable
{01.010} Off (0) or On (1) Off (0) RW Bit US
00.023 Jog Reference {01.005} 0.0 to 400.0 Hz
0.0 to 4000.0 rpm
0.0 Hz / rpm RW Num US
00.024
Preset
Reference 1
{01.021} ±VM_SPEED_FREQ_REF Hz / rpm 0.0 Hz / rpm RW Num US
00.025
Preset
Reference 2
{01.022} ±VM_SPEED_FREQ_REF Hz / rpm 0.0 Hz / rpm RW Num US
00.026
Preset
Reference 3
{01.023}
±VM_SPEED_
FREQ_REF Hz
0.0 Hz RW Num US
Overspeed
Threshold
{03.008} 0 to 40000 rpm 0 rpm RW Num US
00.027
Preset
Reference 4
{01.024}
±VM_SPEED_
FREQ_REF Hz
0.0 Hz RW Num US
00.028
Enable Auxiliary
Key
{06.013}
Disabled (0),
Forward / Reverse (1), Reverse (2)
Disabled (0) RW Num US
00.029
NV Media Card
Data Previously
Loaded
{11.036} 0 to 999 0 RO Num NC PT
00.030
Parameter
Cloning
{11.042}
None (0), Read (1), Program (2),
Auto (3), Boot (4)
None (0) RW Txt NC US
00.031 Rated Voltage {11.033}
200 V (0), 400 V (1),
575 V (2), 690 V (3)
RO Txt ND NC PT
00.032
Maximum Heavy
Duty Rating
{11.032} 0.000 to 99999.999 A
RO Num ND NC PT
00.033
Catch A
Spinning Motor
{06.009}
Disable (0),
Enable (1),
Fwd Only (2),
Rev Only (3)
Disable
(0)
RW Txt US
Motor Parameter
Adaptive Control
{05.016} 0 to 2 0 RW Num US
00.034
User Security
Code
{11.030} 0 to 2147483647 0 RW Num ND NC PT US
00.035 Serial Mode {11.024}
8 2 NP (0), 8 1 NP (1), 8 1 EP (2),
8 1 OP (3), 8 2 NP M (4),
8 1 NP M (5), 8 1 EP M (6),
8 1 OP M (7), 7 2 NP (8),
7 1 NP (9), 7 1 EP (10), 7 1 OP (11),
7 2 NP M (12), 7 1 NP M (13),
7 1 EP M (14), 7 1 OP M (15)
8 2 NP (0) RW Txt US
00.036 Serial Baud Rate {11.025}
300 (0), 600 (1), 1200 (2), 2400 (3),
4800 (4), 9600 (5), 19200 (6), 38400
(7), 57600 (8), 76800 (9), 15200 (10)
19200 (6) RW Txt US
Parameter
Range Default
Type
OL RFC-A RFC-S OL RFC-A RFC-S
Unidrive M600 Getting Started Guide English Iss1.book Page 46 Friday, April 25, 2014 2:08 PM