Emerson Unidrive M702 - Page 34

34 Unidrive M702 Getting Started Guide
Issue Number: 4
Figure 4-6 Size 9E and 10 power and ground connections
A separate line reactor (INLXXX) must be used for size 9E and 10. Failure to provide
sufficient reactance could damage or reduce the service life of the drive. Refer to Table 2-
7 Size 9E and 10 model and line reactor part number on page 13.
Input connections
Mains
Supply
L1 L2
Line reactor
Optional
EMC filter
Fuses
L3
L1 L2 L3
PE
Supply
ground
UVW
Motor
Optional ground
connection
+DC BR
Thermal
overload
protection
device
Output connections
9E
10
CAUT ION
Unidrive M702 Getting Started Guide English iss3.book Page 34 Friday, August 29, 2014 2:33 PM