XWEB PRO 18/23
6.5 INTERNET CONNECTIVITY ON PUBLIC IP
This type of connection will allow you to directly access XWEB from any PC connected to the internet without
having to install - on your PC - any additional software.
Attention: the connection to the Internet presumes to be managed by qualified personnel and / or
by the network administrator.
In order to connect your XWEB to the Internet, you need a 'public and static IP address', which
must be specifically requested from your ISP (Internet Service Provider). Tell your ISP that you want to install
a webserver: this will help them recognize your needs and provide you with an adequate connection. It is
highly recommended to obtain all the details of the supply contract for the management of any future
connection problems.
Connection to the internet is possible in the presence of a router. Its configuration, as well as that of XWEB
depend on the data provided by your ISP. Depending on the type of contract, the provider can supply the
router or the customer can purchase it separately.
Provide your ISP and / or network administrator with the XWEB ports (LAN side)
• 80 (used for HTTP access)
• 22 (used for SSH logins)
To Next Page
Loading...
Need help?
General
