emmeti FEBOS-CRONO User Manual

TABLE OF CONTENTS
GBGB
10
4. GENERAL INFORMATION
The top bar and the bottom bar are common
to all screens:
After 2 minutes of inactivity of the touchscreen the
“standby screen” is activated, which displays the room
temperature and any state of alarm.
Touching the screen activates the display, and the Home
screen is displayed.
The following icon is used to indicate where the screen
must be touched to execute the instruction
(It will not appear on the Febos-Crono display).
Meaning of Icons
Screen name
Access level - GUEST
USER
SERVICE
Padlock open
Settings
Web-connected WiFi signal
Wifi not connected
Date
and time
Language
active
Graphs
Electrical
powers
Sanitary
hot water
Heat
pump
Set
Room
Home
Alarm
Padlock active
Heat pump connected
Not connected
Febos-Energy connected
Not connected
M
Master
11
Slave Address 11
12
Slave Address 12
19
Slave Address 19
Within the screens there are editable values. These are recognizable
because they are enclosed in a cell, pressing the cell will display the
keyboard on which to type the value, press OK to edit.

emmeti FEBOS-CRONO Specifications

General

Brand	emmeti
Model	FEBOS-CRONO
Category	Controller
Language	English