GBGB
28
6.3 Screen 4.1 HEAT PUMP
Pressing the icon accesses the screen
4.1 HEAT PUMP, which can be divided into three parts.
1) HP Widget, read-only, where information relative to the HP
status is displayed:
External temperature
Water flow rate
Water temperature
in the HP output
Water temperature
in the HP input
Electrical power
absorbed
Thermal power rendered in cooling
In heating
Temperature of water leaving
the HP in cooling
In heating
Water inlet temp to HP in
cooling
In heating
6. GUEST SCREENS
HP On
HP Off
Manual Boost
Not available
3) A selection part:
Minimum water tempera-
ture for the radiant
in cooling
Water temperature for compressor
modulation
Current Target
Compressor step
0÷10
Defrosting
Photovoltaic
tracking
MIRAI SMI
in production
ACS
Additional
heater
Frost pro-
tection
Coloured ions if the function is active
2) A read-only part, which displays the information related to the
operation of the HP:
To Next Page
Loading...
Need help?
General
