GBGB
9
3. INSTALLATION
3.3 Wall mounting
The FEBOS-CRONO can be fixed to the wall in two modes: flush with the wall or on a recessed box.
1 Unhook the Febos Crono from the support base
2a Flush with the wall Installation (only for codes 07245100 and 07245110)
2b Installation on recessed box
ATTENTION
Do not tighten the bolts excessively, to avoid damaging the support base.
3 Connect the connectors to the Febos-Crono and hook it again firmly to the support base.
2 Attach the support base to the wall by passing the connectors, previously connected to the electrical circuit.
To Next Page
Loading...
Need help?
General
