- 147 -
Chapter 7. Operation
A selected I/O explorer is divided into an operation part and a display part as above, so you can
add or delete a contact to search through the operation part, and monitor the current value and
forcedly set the relevant contact through the display part.
① Addition of a contact
- Select a contact to search through the
selection box.
- Selecting the
button adds a contact to the display part.
② Deletion of a contact
- Select a contact to delete from the display part.
- Selecting the
button deletes a contact from the display part.
③ Forced setting of a contact
- The forced setting method of a contact is the same as the method described in the I/O
explorer.
Operation
part
Display part
To Next Page
Loading...