- 148 -
Chapter 7. Operation
5) menu
The menu is composed of setting functions as various parameters related to operation of system,
a communication setting function with external devices(PLC or common touch panel) and a communication
port setting function between MSW-MCU2 and MCU.
(1) Basic parameter
A basic parameter is a basic parameter setting function related to the operation of an MCU, so you
can store a basic parameter in the MCU or PC or call its value.
A basic parameter is composed of a tool bar, parameter tree part, parameter setting part, and a
parameter list part to see the content of the parameter.
A tool bar is composed of function buttons to read or store basic parameters from the MCU or PC
and lists to change the physical object.
-
: This is used to select a physical object(PC or MCU) to store or read the entire
basic parameters.
- : This button is used to read the entire basic parameter from a physical object.
-
: This button is used to store the entire basic parameters into a physical object.
-
: This button is used to print the entire basic parameters with a printer.
* Note) Correcting a basic parameter and then storing it in an MCU doesn’t reflect its value on
the operation of an MCU immediately. Selecting the button in the system panel or the
button at the bottom of the main screen reflects the corrected value on the operation of
an MCU.
Correction of a parameter
- Select an item to correct from the parameter list.
- The parameter setting part is changed according to the selected parameter input.
- Enter your desired value through the parameter setting part.
Physical
object
Tool bar
Parameter
setting
Parameter
tree
Parameter
list
To Next Page
Loading...