MOTION CONTROLLER MCU
Precautions in startup and maintenance
Danger
Reference
Page
Do not touch the terminal while power supply is plugged in.
You may get electric shock or cause malfunction.
Turn the power off before cleaning or tightening the terminal further.
You may get electric shock, otherwise.
Do not recharge, disassemble, apply heat, put it in fire or perform short-circuit.
It may lead to burst or outbreak of fire.
Make sure to read the manual carefully before you modify the program while in
operation, perform forceful output, or manipulate the controller using various
functions such as RUN or STOP.
Incorrect handling of the product may cause product damage or unplanned
events.
Make sure to get your body earthed if you need to open the controller cover and
touch the inside to prevent static from flowing into the controller.
Warning
Reference
Page
Make sure to turn the power off before you detach or attach the controller
memory.
z Detaching it while power supply is connected may cause damage on
controller or memory.
Do not disassemble or remodel the product.
It may cause breakdown, malfunction, or even fire.
Contact the nearest customer care center or sales agency for after-sales services.
Make sure to turn the power off before you detach or attach additional connection
cables.
z Otherwise, breakdown or malfunction may be incurred.
Disposal
Warning
Reference
Page
Treat the product as industrial waste when you throw it away.
To Next Page
Loading...