eMKW-TD0054-21- Page 31
The second option relates to the type of audiometer required for the testing. This only limits the area
which will be tested. For example the Diagnostic audiometer settings has a higher dB range than the
screening audiometer. This must be noted carefully, as not all audiometer simulations allow you to test
all frequencies.
The table below is applicable only to devices with extended high frequencies.
If your device does not have this capability then you will see this:
Following the extended high frequency selections is the Threshold seeking method options. Here you
can choose between automated and manual threshold seeking methods, as well as the choosing the
desired intensity seeking step-size (e.g. 5 dB or 2 dB step-size).
Below this section is the option of tones which can be presented, the duration of the tone and the
To Next Page
Loading...