eMKW-TD0054-21- Page 37
Conditioning can be done manually, using the talk forward feature to explain the test procedure to the
patient. Alternatively revert to an automatic conditioning method, where a pre-recorded message will be
read to the patient explaining the test procedure. To switch between these modes click on the button at
the top of the screen that says: Auto Conditioning or Manual Conditioning.
To begin the automatic conditioning, click on the preferred language listed on the right hand side. The
pre-recorded message will play immediately once the language is selected. Once conditioning is
completed the automatic test will commence.
If manual conditioning was done, select to proceed to the test.
Auto Mode:
Conducting a Clinical Test
To Next Page
Loading...