EL – Owner’s Manual – Rev.00 – September 2021 14
Purge Connection Guide (H
2
PURGE)
Connect the H
2
purge port, located at the bottom left
of the front panel, to your hydrogen purge outlet.
During ramp-up, after ramp down and in regular
intervals during operation, the electrolyser
depressurises and releases up to 20 litres of hydrogen
within 2 seconds with a loud noise through the purge
line. Please wear PPE earplugs when being close to
the devices. Purging is necessary to release the water
which has been extracted from the hydrogen.
To Next Page
Loading...
