Enapter Electrolyser - Page 24

VERSION
DOCUMENT TITLE
RELEASE DATE
03
EL – Owner’s Manual
2022-04-29
EL – Owner’s Manual – Rev.04 – April 2022 18
This is a draft manual, technical specifications are subject to change
Three EL4.0 with common H
2
OUT connected to a DR2.1
Three EL4.0 with common H
2
OUT connected to a DR2.1
Caution! Explosive gases in pressurised pipes!
All pressurised connections must be inspected and checked for leakages.
Failure to do so significantly increases the risk of explosion.
All pressurised pipes must be free of metal swarfs, obstructions and other particles as
they might cause injuries and damage when the pressure inside the pipe is released too
quickly.
Enapter is not responsible for any damage caused by improperly installed equipment.