To receive safe and optimum system benefits, please read the
entire manual contents before using the system. Please note
the following instructions:
Intended use:
Bravo™ Blood Glucose Monitoring System is used for the
quantitative measurement of the glucose level in capillary
whole blood as an aid in monitoring diabetes management
of individual user effectively.
Bravo™ Blood Glucose Monitoring System should be used
only for self-testing outside the body (in vitro diagnostic
use only). Bravo™ Blood Glucose Monitoring System should
not be used for the diagnosis of diabetes or for testing
newborns. Testing sites include the traditional fingertip
testing along with alternate sites testing on forearm, palm,
thigh and calf.
The following chart explains the symbols you’ll find in the
Bravo™ User Manual, product packaging, and product
inserts.
IMPORTANT INFORMATION: READ THIS FIRST!
Bravo™ Blood Glucose Monitoring System is intended
for self-testing outside the body (in vitro diagnostic use).
chemicals on the test strip to produce a small electrical
current. The Bravo™ Meter detects this electrical current
and measures the amount of glucose in the blood sample.
Bravo™ Blood Glucose Meter is designed to minimize
code related errors in monitoring by using the no-coding
function.
Bravo™ Blood Glucose Meter should be used only with
the Bravo™ Test Strip.
level over 60% or below 20%) may produce inaccurate
results.
consult a healthcare professional immediately.
Bravo™ Meter and lancing device are for single patient
use. Do not share them with anyone including other family
members.
(having low blood pressure) individuals or patients in
shock. Inaccurate low results may occur for individuals
experiencing a hyperglycemic (high blood sugar) or
hyperosmolar state, with or without ketosis. Critically ill
patients should not be tested with blood glucose meters.
If you need assistance, please contact your authorized
Endomedical™ sales representative or visit www.
endomedical.ca for more information.
IMPORTANT INFORMATION
For in vitro diagnostic use
This product fulfills the requirements for Directive 98/79/EC
on in vitro diagnostic medical devices.
Cautions for safety and optimum product use
Do not discard this product with other household-type waste.
Consult instruction for use Manufacturer
Authorized representative Do not reuse.
Batch code Serial number
Use by Temperature limitations
LOT
SN
2
!
To Next Page
Loading...