Endress+Hauser Cerabar M PMC51 - Scope of delivery; CE mark, Declaration of Conformity; Registered labels

XA02712P-A Cerabar M PMC51, PMP51, PMP55
8 Endress+Hauser
Safety
instructions:
Installation
A
1
2
B
A0023750
A Electronic; Zone 21
B Process; Zone 20
1 Power supply
2 PMC51, PMP51, PMP55
• Do not open in a potentially explosive dust atmosphere.
• Seal the cable entry or piping tight (see protection type of enclosure
in the "Temperature tables" chapter).
• Connect the device using suitable cable and wire entries of protection
type "Equipment dust ignition protection by enclosure (Ex t)" or
"Increased safety (Ex e)" (ingress protection of at least IP65).
Lay connecting cable and secure.