CM14 Technical data
Endress+Hauser 37
Item no. Description Order no.
1 Housing front + foil, incl. keyboard CM14, without display XPM0004-DA
2 CPU/Display board CM14 conductivity conductive
CPU/Display board CM14 conductivity inductive
XPM0004-CK
XPM0004-CL
3 Mainboard 24-230VDC/AC, CM14 XPM0004-NA
4 Relay board + 2 limit relays RIA45X-RA
5 Fixing frame for housing W07 71069917
6 Terminal, 3-pole (power supply) 50078843
7 Pluggable terminal, 4-pole (Memosens input) 71037350
8 Pluggable terminal, 4-pole (current output) 71075062
9 Pluggable terminal, 3-pole (relay terminal) 71037408
10 Threaded bar for tube fixing clip 105mm 71081257
10.5 Return
For a return, e.g. in case of repair, the device must be sent in protective packaging. The
original packaging offers the best protection. Repairs must only be carried out by your
supplier's service organization.
When sending for repair, please enclose a note with a description of the error and the
application.
10.6 Disposal
The device contains electronic components and must, therefore, be disposed of as electronic
waste in the event of disposal. Please pay particular attention to the local regulations
governing waste disposal in your country.
11 Technical data
11.1 Input
11.1.1 Measured variables
--> Documentation of the connected sensor
11.1.2 Measuring ranges
--> Documentation of the connected sensor
11.1.3 Input types
Digital sensor inputs, Memosens and Memosens protocol
To Next Page
Loading...
