Endress+Hauser Deltabar S FMD76 - Operation; On-Site Display (Optional)

Deltabar S PROFIBUS PA Operation
Endress+Hauser 11
4 Operation
4.1 On-site display (optional)
A 4-line liquid crystal display (LCD) is used for display and operation. The on-site display shows
measured values, dialog texts, fault messages and notice messages.
The display of the device can be turned in 90° steps.
Depending on the installation position of the device, this makes it easy to operate the device and
read the measured values.
P01-xxxxxxxx-07-xx-xx-xx-011
E
+
–
Bargraph
Operating keys
Symbol
Bargraph
ValueFunction name
Measured value display
Unit
Header line
Information
line
Main line
Parameter
Identification
number
Editing modes
Selection
options
Value that
can be edited
Current measured value