Endress+Hauser Deltapilot M FMB51 - Page 13

Deltapilot M 4...20 mA HART Installation
Endress+Hauser 13
4.5.4 Mounting the FMB53 with a suspension clamp
A0018793
Fig. 1: Mounting with a suspension clamp
1Extension cable
2 Suspension clamp
3 Clamping jaws
Mounting the suspension clamp:
1. Mount the suspension clamp (item 2). When selecting the place to fix the unit, take the
weight of the extension cable (item 1) and the device into account.
2. Raise the clamping jaws (item 3). Position the extension cable (item 1) between the
clamping jaws as illustrated in Figure.
3. Hold the extension cable in position (item 1) and push the clamping jaws (item 3) back
down.
Tap the clamping jaws gently from above to fix them in place.
1
2
3