Endress+Hauser Deltapilot M FMB51 - Overvoltage Protection (Optional); Post-Connection Check; Operation; Operating Options

Operation Deltapilot M 4...20 mA HART
22 Endress+Hauser
5.2.6 Connecting Field Xpert SFX100
See operating instructions.
5.2.7 Connecting Commubox FXA195
See operating instructions.
5.3 Overvoltage protection (optional)
See operating instructions.
5.4 Post-connection check
Perform the following checks after completing electrical installation of the device:
• Does the supply voltage match the specifications on the nameplate?
• Is the device properly connected?
• Are all screws firmly tightened?
• Are the housing covers screwed down tight?
As soon as voltage is applied to the device, the green LED on the electronic insert lights up for a
few seconds or the connected local display lights up.
6Operation
6.1 Operating options
6.1.1 Operation without operating menu
Operating options Explanation Graphic illustration Description
Local operation without
device display
The device is operated
using the operating keys
and DIP switches on the
electronic insert.
 ä 24
on
off
DisplayDisplay
Zero
Span
SW / P2=High
delta p only
SW / Alarm min
SW / Ö
damping