Parameter description (Local operation and FieldCare) Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
196 Endress+Hauser
P01-xMx7xxxx-19-xx-xx-en-015
Fig. 56: TRANSMITTER INFO group for the TRANSMITTER DATA function group, → ä 196, Table 23: OPERATING
MENU → TRANSMITTER INFO → TRANSMITTER DATA
for the PROCESS CONNECTION function group, → ä 197, Table 24: OPERATING MENU → TRANSMITTER
INFO → PROCESS CONNECTION
for the SENSOR DATA function group, → ä 198, Table 25: OPERATING MENU → TRANSMITTER INFO →
SENSOR DATA
for the FF DATA function group, → ä 199, Table 26: OPERATING MENU → TRANSMITTER INFO → FF
DATA
Tmax SENSOR
SENSOR H/WARE REV.
MAT. MEMBRANE
FILLINGFLUID
Tmin SENSOR
SENSOR MEAS.TYPE
PRESS. SENS LOLIM
PRESS. SEN.HILIM
MINIMUM SPAN
SENSOR SER. NO.
SEAL TYPE
PROC. CONN TYPE
MAT. PROC. CONN.+
MAT. PROC. CONN.–
Pmax PROC. CONN.
ALLOWED MIN.TEMP
ALLOWED MAX. TEMP
DIPSTATUS
HARDWARE REV.
SOFTWARE VERSION
CONFIG RECORDER
PCBTEMPERATURE
DEVICE DESIGN
ELECTR. SERIAL No
PD-TAG
DEVICE SERIAL No
TRANSMITTER DATA
PROCESS CONNECTION SENSOR DATA
MEASURED VALUE
QUICK SETUP
TRANSMITTERINFOSETTINGS
OPERATING MENU
DEVICE ID
DEVICE REVISION
DD REVISION
DEVICE ADRESS
FF DATA
Table 23: OPERATING MENU → TRANSMITTER INFO → TRANSMITTER DATA
Parameter name Description
DEVICE SERIAL No (354)
Display
Displays the serial number of the device (11 alphanumeric characters).
ELECTR. SERIAL No (386)
Display
Displays the serial number of the main electronics (11 alphanumeric characters).
PD-TAG (57) Set tag number for the device.
DEVICE DESIGN. (350)
Display
Displays the device designation and the order code.
HARDWARE REV. (266)
Display
Displays the revision number of the main electronics
e.g. V02.00.00
SOFTWARE VERSION (264)
Display
Displays the software version
e.g.: V 03.00.00
To Next Page
Loading...
