Endress+Hauser Deltapilot S FMB70 - Page 204

Parameter description (Local operation and FieldCare) Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
204 Endress+Hauser
P01-xMx7xxxx-19-xx-xx-en-017
Fig. 58: OPERATION and DIAGNOSTICS group
for the OPERATION group, → ä 205, Table 32: OPERATING MENU → OPERATION
for the SIMULATION function group, → ä 206, Table 33: OPERATING MENU → DIAGNOSTICS →
SIMULATION
for the MESSAGES function group, → ä 207, Table 34: OPERATING MENU → DIAGNOSTICS →
MESSAGES
for the USER LIMITS function group, → ä 208, Table 35: OPERATING MENU → DIAGNOSTICS → USER
LIMITS
PCB MIN. TEMP. (494)
Display
Displays the lowest electronics temperature measured.
RESET PEAKHOLD (382)
Selection
This parameter lists all the peak hold indicator parameters that can be reset. You can
select the peak hold indicators you want to reset.
Options:
•None
•Max. pressure
•Min. pressure
•Pmax history
• Pmin history
•Max. temp.
•Min. temp.
•Tmax history
• Tmin history
•Reset all
Factory setting:
None
Table 31: OPERATING MENU → PROCESSINFO → PEAK HOLD INDICATOR
Parameter name Description
HistoROM AVAIL.
SELSECT ALARMTYPE
ALARM DELAY
ALARM DISPL.TIME
Pmax ALARM WINDOW
Tmin ALARM WINDOW
Tmax ALARM WINDOW
Pmin ALARM WINDOWALARM STATUSSIMULATION MODE
OPERATINGHOURS
INSERT PINNO
ENTER RESET CODE
USER LIMITS
MEASURED VALUE
QUICK SETUP
OPERATION
SETTINGS
OPERATING MENU
ERROR NO.
RESET ALL ALARMS
LAST DIAG. CODE
ACK. ALARM MODE
MESSAGESSIMUALTION MODE
DIAGNOSTICS