Endress+Hauser iTEMP HART TMT162 - Page 30

Commissioning TMT162
30 Endress+Hauser
13 Read tag, descriptor, date r
14 Read primary variable sensor information r
15 Read primary variable output information r
16 Read final assembly number r
17 Write message w
18 Write tag, descriptor, date w
19 Write final assembly number w
Common practice
34 Write primary variable damping value w
35 Write primary variable range values w
38 Reset configuration changed flag w
40 Enter/exit fixed primary variable current mode w
42 Perform master reset w
44 Write primary variable units w
48 Read additional device status r
59 Write number of response preambles w
Device / E+H specific
144 Read matrix parameter r
145 Write matrix parameter w
231 Check Device Status r
No. Description Access