Incoming acceptance and product identification Liquiline CM44P
10 Endress+Hauser
3.2.2 Product identification
Product page
www.endress.com/cm44p
Interpreting the order code
The order code and serial number of your product can be found in the following locations:
• On the nameplate
• In the delivery papers
Obtaining information on the product
1. Go to www.endress.com.
2. Page search (magnifying glass symbol): Enter valid serial number.
3. Search (magnifying glass).
The product structure is displayed in a popup window.
4. Click the product overview.
A new window opens. Here you fill information pertaining to your device, including
the product documentation.
3.2.3 Manufacturer address
Endress+Hauser Conducta GmbH+Co. KG
Dieselstraße 24
D-70839 Gerlingen
3.3 Scope of delivery
The scope of delivery comprises:
• 1 multichannel controller in the version ordered
• 1 mounting plate
• 1 wiring label (attached at the factory to the inside of the display cover)
• 1 external display (if selected as an option)
1)
• 1 DIN rail power unit incl. cable (cabinet device only)
• 1 printed copy of the Operating Instructions for the DIN rail power unit (cabinet device only)
• 1 printed copy of the Brief Operating Instructions in the language ordered
• Disconnection element (pre-installed on hazardous area version type 2DS Ex-i)
• Safety instructions for the hazardous area (for hazardous area version type 2DS Ex-i)
‣
If you have any queries:
Please contact your supplier or local sales center.
1) The external display can be selected as an option in the order structure or ordered as an accessory at a later stage.
To Next Page
Loading...
