Endress+Hauser Liquiline CM44P - Mounting the Measuring Device (Field Device)

Liquiline CM44P Mounting
Endress+Hauser 15
4.1.6 Cable length for optional display
Length of display cable provided (cabinet device only):
3 m (10 ft)
Maximum permitted length of a display cable (cabinet device only):
5 m (16.5 ft)
4.2 Mounting the measuring device (field device)
4.2.1 Post mounting
You require the post mounting kit (optional) to mount the unit on a pipe, post or railing
(square or circular, clamping range 20 to 61 mm (0.79 to 2.40")).
1
2
3
4
56
7
8
A0033044
 6 Post mounting
1 Weather protection cover (optional) 5 Spring washers and nuts (post mounting kit)
2 Post mounting plate (post mounting kit) 6 Pipe or railing (circular/square)
3 Spring washers and nuts (post mounting kit) 7 Mounting plate
4 Pipe clamps (post mounting kit) 8 Threaded rods (post mounting kit)