Endress+Hauser Liquiline CM44P - Page 16

Mounting Liquiline CM44P
16 Endress+Hauser
A0033045
 7 Post mounting
A0025885
 8 Attach the device and click it into place
1. Place the device on the mounting plate.
2. Slide the device downwards in the guide on the mounting rail until it clicks into place.
4.2.2 Rail mounting
1 2
3
4
56
7
8
9
A0012668
 9 Rail mounting
1 Weather protection cover (optional) 6 Pipe or railing (circular/square)
2 Post mounting plate (post mounting kit) 7 Mounting plate
3 Spring washers and nuts (post mounting kit) 8 Threaded rods (post mounting kit)
4 Pipe clamps (post mounting kit) 9 Screws (post mounting kit)
5 Spring washers and nuts (post mounting kit)