Endress+Hauser Liquiline CM44P - Installation

Liquiline CM44P Mounting
Endress+Hauser 17
A0025886
 10 Rail mounting
A0027803
 11 Attach the device and click it into place
1. Place the device on the mounting plate.
2. Slide the device downwards in the guide on the mounting rail until it clicks into place.
4.2.3 Wall mounting
≥ 340 (13.4)
≥
150 (5.91)
A0012686
 12 Installation clearance in mm (in)
1
3
4
2
A0027798
 13 Wall mounting
1 Wall
2
4 drill holes
1)
3 Mounting plate
4 Screws Ø 6 mm (not part of scope of supply)
1)
The size of the drill holes depends on the wall plugs used. The wall plugs and screws must be provided by the customer.