Endress+Hauser Liquiline CM44P - Mounting the Measuring Device (Cabinet Device)

Mounting Liquiline CM44P
18 Endress+Hauser
A0027799
 14 Wall mounting
A0027797
 15 Attach the device and click it into place
1. Place the device on the mounting plate.
2. Slide the device downwards in the guide on the mounting rail until it clicks into place.
4.3 Mounting the measuring device (cabinet device)
4.3.1 DIN rail mounting
The mounting procedure is the same for all Liquiline devices. The example shows a CM448R.
1. In the order configuration, the securing clips are "tightened" to secure the DIN rail.
Release the securing clips by pulling them downwards.

2. Attach the device from the top to the DIN rail (a) and secure it by pressing down (b).

a
b