Liquistation CSF48
36 Endress+Hauser
Material Plastic polystyrene VO can change color when exposed to direct sunlight.
For outdoor use without a weather protection cover, the use of Plastic ASA+PC V0 is
recommended.
The functionality is not affected by the discoloration.
Choose process seal depending on the application.
Viton is recommended for standard applications involving watery samples.
Non-wetted parts
Cabinet housing Plastic polystyrene V0
For standard applications in wastewater treatment plants and
environmental monitoring
Plastic ASA+PC V0
For industrial wastewater treatment plants with an aggressive
atmosphere
Stainless steel V2A (1.4301)
For standard applications in wastewater treatment plants and
environmental monitoring
Stainless steel V4A (1.4571)
For industrial wastewater treatment plants with an aggressive
atmosphere
Sample compartment inner
dish
Plastic PP
Window Safety glass, coated
Insulation Plastic EPS "Neopor®"
Wetted parts Vacuum pump Peristaltic pump Sampling
assembly:
Dosing tube Plastic PP - -
Dosing beaker cover Plastic PP - -
Conductivity sensors Stainless steel V4A (1.4404) - -
Capacitance
sensor
PSU - -
Dosing beaker PMMA, glass (depending on
version)
--
Dosing system outflow hose Silicone - EPDM
Pump tubing - Silicone -
Process seal - - Viton
EPDM
Kalrez
Distribution arm Plastic PP
Distribution arm cover Plastic PE
Distribution plate Plastic PS
Composite container/bottles Plastic PE, glass (depending on version)
Intake hose Plastic PVC, EPDM (depending on version) -
Hose connection Plastic PP -
Rinse connection - - Plastic PP
To Next Page
Loading...
