Endress+Hauser Liquistation CSF48 - Sampler with Online Measurement

Liquistation CSF48
6 Endress+Hauser
Sampler with online
measurement
The following overview shows examples of the design and layout of a measuring system.
Other sensors and assemblies can be ordered for conditions specific to your application. See
Accessories section and also --> www.endress.com/products
Measuring point Nitrate
A complete measuring system with online measurement
consists of:
• Liquistation CSF48 sampler
• Sensors with Memosens technology
• Immersion or flow assemblies to suit the sensors used
a0013214
Measuring system
1 Liquistation CSF48
2 Suction line
3 Sensors with immersion assembly
•Viomax CAS51D sensor
with fixed cable
• Flexdip CYA112 assembly
• Flexdip CYH112 holder
a0013297
Conductivity
Inductive conductivity
measurement
• Flexdip CYA112 immersion
assembly
• Indumax CLS50D sensor
with fixed cable
Conductive conductivity
measurement
• Flexdip CYA112 immersion
assembly
• Condumax CLS15D sensor
a0013346
Oxygen
• Flexdip CYA112 immersion
assembly
• Flexdip CYH112 holder
•Sensor
–Oxymax COS61D (optical)
with fixed cable,
–Oxymax COS51D
(amperometric)
cable CYK10
Figure: CYA112 with COS61D
a0012415
pH value or ORP Turbidity
• Retractable assembly Cleanfit
CPA471
• Orbisint CPS11D, CPS12D sensor
• Measuring cable CYK10
• Flexdip CYA112 immersion
assembly
• Orbisint CPS12D, CPS11D sensor
• Measuring cable CYK10
a0012413
a0012787
• Flexdip CYA112 immersion
assembly
• Spray head CUR4 (optional)
• Turbimax CUS51D sensor
with fixed cable
• Flowfit CUA250 flow assembly
• Turbimax CUS51D sensor
with fixed cable
a0013294
a0012788
1
2
3