Endress+Hauser Micropilot FMR20 - Page 19

Micropilot FMR20 HART
Endress+Hauser 19
Installation with mounting bracket, adjustable
The mounting bracket can be ordered as an accessory or together with the device via the product
structure "Accessory enclosed".
A0030606
 18 Installation with mounting bracket, adjustable
• Wall or ceiling installation is possible.
• Using the mounting bracket, position the antenna so that it is perpendicular to the product
surface.
NOTICE
There is no conductive connection between the mounting bracket and transmitter housing.
Electrostatic charging possible.
‣
Integrate the mounting bracket in the local potential equalization system.
Cantilever installation, with pivot
The cantilever, wall bracket and mounting frame are available as accessories.
A
B
C
A0028412
 19 Cantilever installation, with pivot
A Cantilever with wall bracket
B Cantilever with mounting frame
C Cantilever can be turned (e.g., in order to position the device over the center of the flume)
Installation of horizontal mounting bracket for sewer shafts
The horizontal mounting bracket for sewer shafts is available as an accessory.