Micropilot FMR20 HART
Endress+Hauser 55
W@M is available:
www.endress.com/lifecyclemanagement
System components
Memograph M graphic data manager
The Memograph M graphic data manager provides information on all the relevant process variables.
Measured values are recorded correctly, limit values are monitored and measuring points analyzed.
The data are stored in the 256 MB internal memory and also on an SD card or USB stick.
For details, see Technical Information TI01180R and Operating Instructions BA01338R
RNS221
Supply unit for powering two 2-wire measuring devices. Bidirectional communication is possible via
the HART communication jacks.
For details, see Technical Information TI00081R and Brief Operating Instructions KA00110R
RN221N
Active barrier with power supply for safe separation of 4 to 20 mA standard signal circuits.
Bidirectional HART communication is possible via integrated communication jacks (R=250 Ω).
For details, see Technical Information TI073R and Operating Instructions BA202R
RMA42
Digital process transmitter for monitoring and displaying analog measured values
For details, see Technical Information TI00150R and Operating Instructions BA00287R
RIA452
RIA452 digital process indicator, panel mounted housing for monitoring and displaying analog
measured values with batch and pump control functions and flow calculation
For details, see Technical Information TI113R and Operating Instructions BA00254R
HAW562
Overvoltage protection device for DIN rail as per IEC 60715, suitable for protecting electronics
against destruction as a result of overvoltage.
For details, see Technical Information TI01012K
To Next Page
Loading...
