Endress+Hauser Micropilot FMR20 - Post-connection check

Micropilot FMR20 HART
26 Endress+Hauser
80 mm (3 in) antenna with slip-on flange 6"/DN150
ø240 (9.45)
ø98 (3.86)
ø241.3 (9.5)
ø285 (11.2)
188 (7.4)
20 (0.79)
30.5 (1.2)
ø143 (5.63)
8 x
23 (0.91)
A0028818
 30 Dimensions of 80 mm (3 in) antenna with slip-on flange 6"/DN150, engineering unit: mm (in)
The slip-on flange 6"/DN150, PVDF, can be ordered together with the device via the product
structure "Accessory enclosed".
Counter nut for process connection, rear side
8 (0.31)
G 1"
1
2 (0.08)
41 mm
2 (0.08)
A0028419
 31 Dimensions of counter nut for process connection, rear side, engineering unit: mm (in)
1 Seal
• The counter nut with seal (EPDM) is included in the scope of supply.
• Material: PA66
Weight
Weight (incl. 5 m (16.4 ft) cable)
• Device with 40 mm (1.5 in) antenna: approx. 2.5 kg (5.5 lb)
• Device with 80 mm (3 in) antenna: approx. 2.8 kg (6.2 lb)