Micropilot FMR20 Modbus RS485 Installation
Endress+Hauser 11
23 Modification mark
24 2-D matrix code (QR code)
25 Date of manufacture: year-month
Up to 33 characters of the extended order code are indicated on the nameplate. If the
extended order code contains additional characters, these cannot be displayed.
However, the complete extended order code can also be displayed via the device
operating menu: Extended order code 1 to 3 parameter
5 Installation
Removing the cable transportation guard
In the case of devices with a rear-side process connection "FNPT1/2 conduit", the cable
protective plug must be removed before installation.
1 → 2 → 3
A0042437 A0042438 A0042439
To Next Page
Loading...
