XA00688F-A Micropilot FMR50/51/52/53/54/56/57
14 Endress+Hauser
Associated documentation This document is an integral part of the following Operating Instructions:
• PROFIBUS PA:
BA01124F/00 (FMR50), BA01125F/00 (FMR51/52), BA01126F/00 (FMR53/54),
BA01127F/00 (FMR56/57)
• FOUNDATION Fieldbus:
BA01120F/00 (FMR50), BA01121F/00 (FMR51/52), BA01122F/00 (FMR53/54),
BA01123F/00 (FMR56/57)
The Operating Instructions pertaining to the device apply.
Supplementary
documentation
Explosion-protection brochure:
CP00021Z/11
The Explosion-protection brochure is available:
• In the download area of the Endress+Hauser website: www.endress.com Download Advanced
Documentation Code: CP00021Z
• On the CD for devices with CD-based documentation
Manufacturer's certificates EC Declaration of Conformity
ä 3
EC type-examination certificate
Certificate number:
PTB 12 ATEX 2018 X
IEC Declaration of Conformity
Certificate number:
IECEx PTB 12.0044 X
Affixing the certificate number certifies conformity with the standards under www.IECEx.com (depending on
the device version).
• IEC 60079-0 : 2011
• IEC 60079-1 : 2007
• IEC 60079-11 : 2011
• IEC 60079-26 : 2006
Extended order code The extended order code is indicated on the nameplate, which is affixed to the device in such a way that it is
clearly visible. Additional information about the nameplate is provided in the associated Operating Instructions.
Structure of the extended order code
• Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the basic
specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
• Optional specifications
The optional specifications describe additional features for the device (optional features). The number of
positions depends on the number of features available.
The features have a 2-digit structure to aid identification (e.g. JA). The first digit (ID) stands for the feature
group and consists of a number or a letter (e.g. J = test, certificate).
The second digit constitutes the value that stands for the feature within the group (e.g. A = 3.1 material
(wetted parts), inspection certificate).
FMR5x - ************* + A*B*C*D*E*F*G*..
------------------ ------------------------ ------------------------------
Device type Basic specifications Optional specifications
* = Placeholder
At this position, an option (number or letter) selected from the specification is displayed instead of the
placeholders.
To Next Page
Loading...
