Endress+Hauser NRF81 - Page 134

Operating menu Tankside Monitor NRF81
134 Endress+Hauser
Additional information
Read access Operator
Write access -
Process variable 
Navigation  Setup → Advanced setup → Input/output → Analog IP → Process variable
Prerequisite Operating mode (→  132) ≠ RTD temperature input
Description Determines type of measured value.
Selection • Level linearized
• Temperature
• Pressure
• Density
Factory setting Level linearized
Additional information
Read access Operator
Write access Maintenance
0 % value 
Navigation  Setup → Advanced setup → Input/output → Analog IP → 0 % value
Prerequisite Operating mode (→  132) = 4..20mA input
Description Defines the value represented by a current of 4mA.
User entry Signed floating-point number
Factory setting 0 mm
Additional information
Read access Operator
Write access Maintenance
100 % value 
Navigation  Setup → Advanced setup → Input/output → Analog IP → 100 % value
Prerequisite Operating mode (→  132) = 4..20mA input
Description Defines the value represented by a current of 20mA.