Endress+Hauser NRF81 - Page 145

Tankside Monitor NRF81 Operating menu
Endress+Hauser 145
Additional information
Read access Operator
Write access Maintenance
Error event type 
Navigation  Setup → Advanced setup → Input/output → Analog I/O → Error event type
Prerequisite Operating mode (→  138) ≠ Disabled or HART master
Description Defines the type of event message (alarm/warning) in case of an error or output out of
range in the analog I/O module.
Selection • None
• Warning
• Alarm
Factory setting Warning
Additional information
Read access Operator
Write access Maintenance
Process value
Navigation  Setup → Advanced setup → Input/output → Analog I/O → Process value
Prerequisite Operating mode (→  138) = 4..20mA input or HART master+4..20mA input
Description Shows the input value scaled to customer units.
Additional information
Read access Operator
Write access -
Input value in mA
Navigation  Setup → Advanced setup → Input/output → Analog I/O → Input value in mA
Prerequisite Operating mode (→  138) = 4..20mA input or HART master+4..20mA input
Description Shows the input value in mA.
Additional information
Read access Operator
Write access -