Endress+Hauser Proline Prosonic Flow B 200 - Setting the Operating Language; Configuring the Measuring Device

Commissioning Proline Prosonic Flow B 200
36 Endress+Hauser
9.3 Setting the operating language
Factory setting: English or ordered local language
X X X X X X XX X
20.50
Display/operat.
Setup
Main menu
0104-1
Language
English
Español
Français
Language
English
Deutsch
Ã
0104-1
Ã
Español
Français
Language
English
Deutsch
0104-1
Anzeige/Betrieb
Setup
Hauptmenü
Sprache
Deutsch
0104-1
XXXX
A0013996
 6 Taking the example of the local display
9.4 Configuring the measuring device
The Setup menu and its guided wizards enable fast commissioning of the measuring device.
The wizards systematically guide the user through all the parameters required for
configuration, such as parameters for measurement or outputs.
Wizard Meaning
HART input Configuring the HART input
Current output 1 Configuring output 1
Pulse/frequency/switch output Configuring the selected output type
Display Configuring the measured value display
Output conditioning Defining the output conditioning
Low flow cut off Configuring the low flow cut off