Proline t-mass 65F, 65I
36 Endress+Hauser
Accessories
The Endress +Hauser service organisation can provide detailed information on request.
Device-specific accessories
Measuring principle-specific
accessories
Communication-specific
accessories
Service-specific accessories
Accessory Description Order code
Mounting boss Mounting boss for the t-mass insertion version DK6MB - *
Cable remote version Connecting cable for the remote version DK6CA - *
Accessory Description Order code
Mounting set for
transmitter
Mounting set for remote version. Suitable for:
– Wall mounting
– Pipe mounting
– Installation in control panel
Mounting set for aluminium field housing:
Suitable for pipe mounting (3/4" to 3")
DK6WM - *
Cold Tap mounting set Insertion mounting set for low pressure DK6ML - *
Hot Tap mounting set Insertion mounting set for high pressure Contact your local Endress+Hauser
sales representative for more
information.
Flow conditioners Perforated plate flow conditoners for various line sizes
and schedules.
(t-mass F sensor only)
Contact your local Endress+Hauser
sales representative for more
information.
Accessory Description Order code
HART Communicator
DXR 375 handheld
terminal
Handheld terminal for remote parameterisation and for
obtaining measured values via the current output HART
(4 to 20 mA).
DXR375 - * * * *
Contact your local Endress+Hauser
sales representative for more
information.
Accessory Description Order code
Applicator Software for selecting and configuring flowmeters.
Applicator can be downloaded from the Internet or
ordered on CD-ROM for installation on a local PC.
DKA80 - *
Contact your local Endress+Hauser
sales representative for more
information.
ToF Tool - Fieldtool
Package
Modular software package consisting of the service
program “ToF Tool” for configuration and diagnosis of
ToF level measuring devices (time-of-flight
measurement) and the "Fieldtool" service program for
the configuration and diagnosis of Proline flowmeters.
The Proline flowmeters are accessed via a service
interface or via the service interface FXA 193.
Contents of the “ToF Tool - Fieldtool Package”:
– Commissioning, maintenance analysis
– Configuring flowmeters
– Service functions
– Visualisation of process data
– Trouble-shooting
– Controlling the “Fieldcheck” tester/simulator
DXS10 - * * * * *
Contact your local Endress+Hauser
sales representative for more
information.
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the “ToF Tool -
Fieldtool Package” software package, test results can be
imported into a database, printed and used for official
certification.
50098801
Contact your local Endress+Hauser
sales representative for more
information.
To Next Page
Loading...
