Proline t-mass 65F, 65I
4 Endress+Hauser
Input
Measured variable Mass flow
Gas temperature
Measuring range
(air at ambient conditions)
The measuring range is dependant on the gas selection, line size and use of flow conditioner. Each meter is
individually calibrated on air and mathematically converted to suit the customer specific gas, where required.
The table below defines the ranges available for air without flowconditioner. Please refer to your
Endress+Hauser representative or to Applicator, the selection tool, for other gases and process conditions.
Measuring range for the flanged version, metric units:
Measuring range for the flanged version, US units:
Measuring range for the insertion version, metric units:
In order to achieve optimum performance it is recommended that under operating conditions the maximum
velocity is limited to a value below 70 m/sec.
DN kg/h Nm
3
/h at 0°C, 1.013 bar a scf/min. at 15°C, 1.013 bar a
min. max. min. max. min. max.
15 0.5 53 0.38 41 0.23 25
25 2 200 1.5 155 1.0 96
40 6 555 4.6 429 3.0 266
50 10 910 7.7 704 5.0 436
80 20 2030 15.5 1570 10 974
100 38 3750 29 2900 18 1800
DN lb/h Sm
3
/h at 59 °F, 14.7 psi a scf/min. at 59 °F, 14.7 psi a
minimum maximum minimum maximum minimum maximum
1/2" 1.1 116 0.4 42 0.23 25
1" 4.4 440 1.6 160 1.0 96
1 1/2" 13.2 1220 4.8 450 3.0 266
2" 22 2002 8 740 5.0 436
3" 44 4466 16 1656 10 974
4" 84 8250 30 3060 18 1800
DN kg/h Nm
3
/h at 0°C, 1.013 bar a scf/min. at 15°C, 1.013 bar a
min. max. min. max. min. max.
80 20 2030 15.5 1570 9.6 974
100 38 3750 29.0 2900 18 1800
150 50 7500 38 5800 24 3600
200 80 12500 62 9666 38 6000
250 120 20000 93 15468 58 9600
300 180 28000 139 21655 86 13440
400 300 50000 232 38670 144 24000
500 500 80000 386 61870 240 38400
600 700 115000 540 88940 336 55200
700 900 159000 696 122970 432 76300
1000 2000 320000 1546 247846 960 153600
1500 2500 720000 1933 556844 1200 345600
To Next Page
Loading...
