EA01164D
Endress+Hauser 19
9.3 Assembling the transmitter
Reassembly is carried out in reverse order.
9.3.1 Check the data on the wired-on tag plate:
Wired-on tag plate for DK5009, DK50011, DK8009, DK80011:
• Serial number of device
• New order code
• Software license code to be entered (appl. package code)
Wired-on tag plate for DKZ004:
• Serial number of device
• Modification kit serial number
• Device modified with
• New order code
• Software license code to be entered (I/O alteration code)
• Configuration
• Connection data
9.3.2 Fitting the wired-on tag plate (DK5009, DK50011, DK5009, DK50011,
DKZ004):
1
9.3.3 Fit the adhesive label (DKZ004):
Replace the adhesive label with the new terminal designation in the connection compartment.
9.3.4 Fit the nameplate:
Fit the nameplate (optional) according to the existing device labeling (see also Section 3
→ 5 Authorized personnel).
Following modification, back up the data in the device memory or via Web server/
Fieldcare.
To Next Page
Loading...
