EA01164D
Endress+Hauser 5
2.2 Upgrading with additional I/O hardware:
Measuring device approval Personnel authorized to carry out modification
1)
Without approval 1, 2, 3
With approval (e.g. IECEx) 2, 3
For custody transfer 4
1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/modification must be performed under supervision.
3 Personnel authorized to fit new nameplates
Measuring device approval Personnel authorized to fit new nameplates
Without approval 2, 3
With approval (e.g. IECEx) Endress+Hauser*
* Note: Some countries/markets require a field inspection in order to change
nameplates. Please act in accordance with national legislation.
Following modification, back up the data via the device memory or via Web server/
Fieldcare.
4 Checking the configuration of the modification kit
supplied
Modification kits and Installation Instructions are used to upgrade certain functions of an
Endress+Hauser measuring device. Only original parts from Endress+Hauser may be used.
Only modification kits designed by Endress+Hauser for the measuring device can be used at
any time.
To Next Page
Loading...
